New meeting location for the 2023/2024 Season will be at J.A. Dulude arena.  Meetings start at 7 pm.

Xiaan's 180G Reef Tank & Move

Started by xiaan, July 20, 2011, 02:15:02 PM

Previous topic - Next topic

xiaan

Some of you might have heard that I have made moved up to Chelsea from my small home in Nepean. It has been a tough and exhausting journey for my tank I had just over 1 week to move my tank a vacate my old house.

I decided on getting a new tank and selling my old tank instead of moving it as that would allow me to have both setups in place to move livestock. I went again for a custom tank from Miracles Aquarium as there build quality is the best I have seen and I can get the tank size I like with the features I want. I ordered the tank 3 months ago from them in anticipation of the move.

Here are the tank specs
This time I went for a slightly bigger tank 180G (48x36x24) with 3 viewable starfire glass sides and two 3/4" returns and again I went with a external coast to coast overflow. I also got Miracles to make me a custom stand for the aquarium to sit on.




For the sump I will be only saving one tank out of my current system it is a 50G (36x16x19) sump tank.

I will be also adding another sump area for my skimmer and other equipment
Custom made rimless 20G (24x16x12)



And finally I am replacing my frag tank with a new custom rimless 30G (36x18x12)



I was planning to use most of the other equipment from the old tank as much as possible but I did get some new things.

Skimmer:
With a total water volume around 280G I decided to get a a new skimmer that was rated to at least 300G. I decided to go with the Vertex Alpha Cone 200 It had a nice small footprint that would fit well in my tank and I like the ultra silent Red Dragon pump it comes with.

Return Pump:
The return pump on my old system was a Reeflo UNO Wahoo it is a good pump for pumping up to a second floor but since my setup was going to be all on the same floor I did not need the pressure rated Wahoo. instead I settled on a Octopus Water Blaster HY-5000

Lighting:
My sump Area is currently all LED lit. I had a 5 x 15" ReefBrite fixtures running on my frag tank but I had recently upgraded that to a AI Sol White so I was going to use both of these to light my frag tank. For my Refuge I am using one 15" White ReefBrite and a 14K Par 38 spot light. For the main tank I wanted to go with mostly LED but I am still not 100% sold on there use for Growing SPS (still testing on my frag tank but I am about 98% there). on my old tank I was using 2 x 6x39W ATI Sunpower and 3 x 36" ReefBrite Blue Fixtures. I sold off one of my Sunpower fixtures and Got 4 x AI Sol Blue Fixtures for the main tank. so now the display tank will be lit by 1x 6x39W ATI Sunpower, 3x 36" ReefBrite Blue and 4 x AI Sol Blue. (I should also explain that I have replaced the ballasts in my Sunpower with dimmable ones and also the drivers for the ReefBrites are swapped out for dimmable ones I did this about 10 months ago but that is another thread :D )

Flow:
I already had  2 x Vortech MP40wES  and  2 x Vortech MP10wES (for the frag tank) I only need to get one extra MP40w for the main tank to give it the flow I needed. I also picked up a extra battery backup just in case.

This will be my 4th tank upgrade if you would like to see my previous tank builds and progression to this build:
First tank Build pt.1: http://ovas.ca/forum/index.php?topic=22059.0
First tank Build pt.2: http://ovas.ca/forum/index.php?topic=24393.0
Sump Upgrade: http://ovas.ca/forum/index.php?topic=31097.0
130G Tank: http://ovas.ca/forum/index.php?topic=40791.0

So here is how the build went:

Day 0 Wednesday June 29th
Picked up some final plumbing supply from PVC plus & picked up my frag tank from Jim (Forty Fathoms) at the airport.

Day 1 Thursday June 30th
9am Packed up my car full of plumbing supply, tank build stuff and new sump stand.
10am Got keys to new place

Again I will have a remote sump to keep the noise down and for me to have room to work (and to make a mess on the floor ;D) Here is a photo of where the sump will be located (I moved the washer and dryer to an adjoining bathroom)


I spent the rest of the day cleaning the house and prep for painting.

Day 2 Friday July 1st
Since my sump stand was a little bigger than the area I had planed for I had to do some modifications to it so it would fit in the area I had to move the drain pipe from the kitchen sink over about 4" so I can fit my stand in.

Day 3 Saturday July 2nd
Placed stand in the correct location and leveled it.
Here is a photo of the sump stand in place it measures 5' long by 2' wide by 4' high.


Day 4 Sunday July 3rd
Added overflow and divider to the frag tank. I am planning on using this as both a QT tank and an frag tank.



Mass of plumbing supply's waiting to go.


Day 5 Monday July 4th
Packing up old the house (no work on the tank)

Day 6 Tuesday July 5th
Move day not much happening on the tank.

Day 7 Wednesday July 6th
I moved my RODI from the old house to the new house and started making water. I also found out my tank will be delivered to my old house the next day  ??? . since my new address was in Quebec they needed to use a different shipping company and that would cost me an extra $200 so I decided to have it shipped to my old place in Nepean get about 7 guys together to move the tanks (I needed to do this anyway) and then rent a truck.

Day 8 Thursday July 7th
This was a big day I had made about 100G of water overnight (I have a 150GPD RODI unit  ;D) and at 6am started mixing salt at the same time I did some plumbing to hook up the sump completely, at 12pm I headed back to the old place stopped in at PVC Plus to get some extra fittings (and locked my keys in my car for 1hour while my GF came to rescue me) finally getting to my house.
At 2:30pm at that time I disconnected my sump and had my display and frag tank running independently each with just the heater and the power heads & lighting running. I drained the sump and put all the live rock and macro algae in buckets.
At 3pm the truck from Miracles arrived with my stand Tank and sump along with Kumara's (Kman) tank and parked it in my old house's driveway.
At 4pm I went off to pick up the 15' Rental truck I was back to my house by 6pm in witch I met up with 4 friends, Kumara & his brother In law. we loaded all the tanks (even my 50G sump tank, equipment & live rock from my basement) in the truck and drove off to Kumara house to drop off his tank, he had ordered a 48x36x27 but that think the tank felt twice as heavy as mine and we had to take it off the palate and rotate it into its side to get it into his house (It was a good thing there was 7 of us). Next is was off to my place witch was a little easier to place (I have a walk out basement and double french doors into the basement = no rotating the tank on its side) when the tanks where in place it was pizza and beer for all ;D

After everyone had left (around 9pm) I returned the rental truck and went back to my old place to pickup some leftover plumbing and cables returning to my new place by 1am for bed.

Day 9 Friday July 8th
I spent the next day from 8am to around 12am plumbing in the new tank. while plumbing I also added the new sand bed and started to fill up the display. That evening I had the whole tank plumbed in but I was short about 10G of water (I could not put my standpipes in my overflow or my return would not work)

Day 10 Saturday July 9th
In the morning I checked for leaks and finished off a bit of the plumbing (Added in my reactors and set up the skimmer)
at 2pm I left for my old house with lots of buckets and some large Rubbermaid containers. When I arrived at the old house I spent the next 1.5 hours loading 130G worth of my live-rock/coral/fish/inverts into my Toyota Matrix (yes I did it all in one trip!) and by 8pm that evening I had everything into my the new tank (absolutely no aquascaping was done just made shore that the coral was was going to sting any other coral).

Day 11 Sunday July 10th
The next day I when back to the old house and filled up my car with the lights and controller & pumps from the old display (I did not have room to bring them with the livestock) I also emptied out my frag 15G frag tank in the basement and put all the frags in buckets. I also had time to clean out the old tank and dismantle my old sump stand to get it ready for pickup I also did a big cleaning of my sump area and living room. I headed back home and added my pumps, lights & controller to the main tank and set up the lights. at 7pm I went back to the old place since Alex (ordi260) was going to pick up my old tank

Day 12 Monday July 11th
Possession day for old my house (not much tank work)

Fast forward:
Day 14&15 July 13 & 14
Back to work (Real work) in the evenings I set up my dousing pumps and ATO

Day 17 Saturday July 16
Aquascaped my tank I went for a patch reef in the center of the tank very simple but with lots of caves and it is very open (my tang can swim right though it).

Day 18 Sunday July 17
In the days leading up to the move I had neglected my tank and I actually forgot to keep my AC on one day this over heated the tank a little (tank went to 85F) and it caused me to loose several fish and my cleaner shrimp (only the most hearty survived) but all of my coral survived. when I moved I was down to only my Sailfin Tang, Pair of clowns, Midas Blenny, Royal Gramma, Six-line Wrasse, and two Cromids.

On the Sunday morning I sopped over to Ray's and picked up a pair of Swallowtail Angels (I had lost my first one a couple of days ago) I also picked up a Randall's Shrimp Goby (Amblyeleotris randalli) & pistol shrimp.

In the afternoon I stopped over at Alex's (CanadaReef) to pick up some dry goods, cleanup crew, and pickup a blue spotted Jawfish from him that I had on hold before the tank move.

I got home and acclimated the fish, Jawfish & Goby when it to the frag tank system and the Angles went into the display (they are too big for my frag tank)

After sitting down to eat my plan for the evening was to sit down and enjoy my newly aquascaped and stocked tank. but at 7:05pm the power went out....

I quickly scrambled to install my battery backups for my Vortech's (I had not done that yet) and for the next 12h I was just running of these.

Day 19 Monday July 18
After not a very restful night I awoke to still no power at the house. I gave a qick call to hydro and they told me that power might be restored by 3pm today  :'( and one of my battery backups was starting to fail (2 MP40w is stated to run for 18h run time but that is a brand new battery they only lasted 13h)

At 8pm Canadian Tire opened up and I was the first one in the door to pick up my shiny new 3000w Generator (I was planning on getting one within the month but this accelerated my plan) and by 9:30 my return and vortech's were up and running again (along with the fridge and freezer)

I went off to work and came back around 4pm and still no power. We decided to head off to the beach for a couple hours with my GF as since we are on a well we have not had running water or a shower in 24h. when we got back at 6:30pm we had power.


Yesterday I did a little work on the tank aquascaping (epoxying things that have fallen) I also received a new return pump I found that my HY-5000 was a little under powered for what I wanted to run so I got the HY-7000 and it seems to be working quite well.

I still have some work to do. My wiring is not nice and neat and I have to hide the three pipes from the display to the sump in the wall. but other than that the tank is operating quite nicely and everyone is doing fine (no losses yet since the over heat)

I hope to have some photos up of the final build ether today or tomorrow sorry I did not have allot of time to take photos during the build I was very pressed for time.

JetJumper

wow, sounds like a fun week!  haha.. can't wait for the pictures!

.: JetJumper's Zone :.

xiaan

So here are some photos of the current setup

The tank is 3 sided viewable starfire

Display tank FTS Front


Left Side


Right Side


Lighting setup over display


Completed sump room




Frag Tank


Sump


Return Pump and ATO Tank


Skimmer


Dousing Pumps and Monitoring computer running Reef Status.


Softy Frag tank


SPS Frag tank (currently full after the move)


Refuge


New residents:
Randall's Shrimp Goby


Male Swallowtail Angelfish (the Female is hiding in the rock work)



And finally the bane of my tank move (I got stung twice and it was not nice my thumb swelled up and kepted me awake for most of a night)




















dan2x38

I know about moving tanks did this year for just a 75 + 30 sump in stand that killed me. Dedicated an entire day to just it and rented a van for just that day. I understand not wanting to move it wish I could setup a new system first. It is very stressful... enough about me...

That is an amazing build looking very good. Well planned out system especially the back-up 3000w generator - need that in Quebec I hear.
Voltaire:
"I may not agree with what you have to say,
but I'll defend to the death your right to say it."

xiaan

#4
thanks.

I think for a tank this size a little disaster planing is good.

Here is a good video on planning for one for your tank:
http://www.mrsaltwatertank.com/disaster-planning-for-your-saltwater-tank/

My tank right now is really maxed out with coral so the the only things I will be adding to the tank will be some fish.

Currently here is the list of fish in my tank:

Sailfin Tang (Zebrasoma veliferum)
2x Blackspot Lyretail Angelfish (Genicanthus melanospilos)
Royal Gramma Basslet (Gramma loreto)
Midas Blenny (Ecsenius midas)
2x Ocellaris Clownfish (Amphiprion ocellaris)
2x Blue/Green Reef Chromis (Chromis viridis) (*one)
Randall's Shrimp Goby (Amblyeleotris randalli)*
Bluespotted Jawfish (Opistognathus rosenblatti)*
Six Line Wrasse (Pseudocheilinus hexataenia)*

* Currently in QT

Here is the list of fish I am currently looking to put into the tank.
Helfrichi Firefish (Nemateleotris helfrichi)
5 x Lyretail Anthias (Pseudanthias squamipinnis) or Ignitus Anthias (Pseudanthias ignitus) (1M & 4F)
4 x Neon Goby (Elacatinus oceanops)
Hector's Goby (Amblygobius hectori)
Red Velvet Fairy Wrasse (Cirrhilabrus rubrisquamis)
Carpenter's Flasher Wrasse (Paracheilinus carpenteri)
Yellow Pyramid Butterfly (Hemitaurichthys polylepis)

The Wrasses are still in debate as I might put the six-line in the main tank.

also has any experience with the Pyramid Butterfly? I here they are "Reef Safe"

kole18

very nice tank man & are you selling some frags now ;D

xiaan


kole18

man you should try to post your tank at RC very empressive tank  ;D

az

very nice, you already need a bigger tank!!!

AQUA VALLEY    
1158 Ogilvie Road, Ottawa

2016 Hours
Tue, Wed, Thu, Fri >> 12-7pm
Sat, Sun >> 11-5pm
Mon >> CLOSED
Tel: 613 695 6961 Fax: 613 695 6532  
www.aquavalley.ca

Ottawa's BIGGEST SALTWATER Selection

Tel: 613 695 6961 Fax: 613 695 6532     www.aquavalley.ca

xiaan

Quote from: az on July 22, 2011, 11:14:31 AM
very nice, you already need a bigger tank!!!



I have been told that is as big as I can go  ;D

jimskoi


kole18

Pyramid angel is a plankton feeder so this fish a reef safe

xiaan

I do know that the Pyramid Butterfly is reef safe but I was wondering if anyone had tried to keep them and If they have had any issues with them.

Cheebs

Fantastic looking tank Xiaan, I am impressed.

zoom111

Tank is looking good ! And nice detailed walk-through on the move.

If you dont mind me asking, where did you pick up your power-bar with the multiple on-off switches. I was looking at rackmounts but this one looks a bit cheaper than $40+.

Rybren

Quote from: zoom111 on July 27, 2011, 01:15:48 PM
If you dont mind me asking, where did you pick up your power-bar with the multiple on-off switches. I was looking at rackmounts but this one looks a bit cheaper than $40+.

I got mine at tigerdirect.ca.  I've never been able to find them locally.
120G Reef


zoom111


xiaan


So here is an update I have decided to go all LED for my lighting and will be replacing the ATI Sunpower with 3 more AI Sol Blue modules bringing my total count up to 7 AI modules. I have ordered these and should be getting them within a week or two.

Also currently I am using a EHEIM 1250 Universal for my Next Reef Bio-Pellet reactor but I have been finding that pump just doesn't give enough flow so I went ahead and ordered a Water Blaster HY-2000 (500GPH) hopefully that will be enough flow to keep the pellets tumbling (I found that 300GPH is not enough flow)

Greatwhite

Quote from: Rybren on July 27, 2011, 01:22:43 PM
I got mine at tigerdirect.ca.  I've never been able to find them locally.

+1... I ordered 2 of them.  Works perfectly.  I forwarded the info on to Az to see if he could get them locally, but they wanted too much shipping and weren't really giving him a deal any better than we could get ordering them ourselves.  Tiger Direct ships fast, at least.

zoom111

Quote from: Greatwhite on July 29, 2011, 12:03:16 PM
...Tiger Direct ships fast, at least.

And i noticed they used UPS, but within the same country their should be no hidden fees correct ?? (Ive ordered UPS from the states before and brokerage will getcha)

Greatwhite

Yeah, buying in canada = no exchange and stuff.  They just dropped it at my door and left.  I don't even think I signed for it.

Anyways - back to Xiaan's 180!  Nice setup! :)

White Lightning


xiaan

#23
Here is an update on the tank. I am currently in the process of socking up the tank with fish. I have had some losses in the past few weeks most likely due to the stress of the move.

I lost two of my older fish the Royal Gramma Basslet (Gramma loreto) and Midas Blenny (Ecsenius midas) both around 3 years old. since I love those two fish I will be replacing them. I also lost my Randall's Shrimp Goby in QT after a week most likely due to the fact he was not eating and there was a big salinity change from where he was 1.017 to 1.026 (I guess 5 hours was not long enough)

I also picked up a couple of fish last week two Helfrichi Firefish, Neon Goby, and five Bartlett's Anthias all in in the main tank an are looking good.


Here is my current stock list in the tank.

Sailfin Tang (Zebrasoma veliferum)
2x Blackspot Lyretail Angelfish (Genicanthus melanospilos)
2x Ocellaris Clownfish (Amphiprion ocellaris)
2x Blue/Green Reef Chromis (Chromis viridis)
2x Helfrichi Firefish (Nemateleotris helfrichi)
Neon Goby (Elacatinus oceanops)
Bluespotted Jawfish (Opistognathus rosenblatti)
5 x Bartlett's Anthias (Pseudanthias bartlettorum)
Six Line Wrasse (Pseudocheilinus hexataenia)*

* Currently in QT

I am still looking at replacing some of the fish that I lost and added a couple more.
Here is the list of fish I am currently looking to put into the tank.

Randall's Shrimp Goby (Amblyeleotris randalli)
Yellow Pyramid Butterfly (Hemitaurichthys polylepis)
Royal Gramma Basslet (Gramma loreto)
Midas Blenny (Ecsenius midas)
3x Banggai Cardinalfish (Pterapogon kauderni)
2x Fairy Wrasses ( real nice ones :) )

If I get the Wrasses then my six line will have to live in my Frag tank as I will not risk adding it to the tank and fighting with the Fairy Wrasses. also that leaves me with the possibly of getting a Mandarin in the future.

Also my LED lights arrived on Friday and now have completely gone LED so far everything looks good but only time will tell.

Cheebs

Very cool, I'm excited to see some pics, especially with the all LED steup. I just picked up a Helfrichi Firefish myself, and it's one of my favorite fish so far, visually and behavior wise :)

xiaan

Time for another update on the tank.

I have had another loss in my tank my Blue spotted jawfish passed on I really never got it to eat. I find it is really hit an miss with this jawfish and it really hard to please in a normal reef tank I will probably not try one again (this was my second the first one lasted about 8 months before passing on).

Last weekend I picked up a four more fish for the tank.

Smith's Blenny (Meiacanthus smithii)
Wheeler's Goby (Amblyeleotris sp. I was told it was a Wheeler's Goby But I think it might be something different)

I also picked up two really nice Fairy Wrasses.

Rhomboid Fairy Wrasse (Cirrhilabrus rhomboidalis)


Lineatus Fairy Wrasse (Cirrhilabrus linneatus)


Another bit of bad news when I was acclimatizing my new fish I was looking at my current tank mates and my Male Swallowtail angle look like he had something on his mouth. over the last week I have been watching him and he has been eating fine but there seems to be a fungal infection around his mouth. today I removed him from the display tank and am currently setting up a QT for him and I will have to treat him with an anti bacterial/fungal medication (currently on order and should arrive by next friday).

Also one of my AI units decided to go for a swim I thought I got it out in time but the control borad is fried. I orded a new one directly from AI in the mean time I will have to be only lit by 6 AI SoBlue modules.

Here is a the current list of fish in the tank:
Sailfin Tang (Zebrasoma veliferum)
2x Blackspot Lyretail Angelfish (Genicanthus melanospilos) (* Male in Frag Tank)
2x Ocellaris Clownfish (Amphiprion ocellaris)
2x Blue/Green Reef Chromis (Chromis viridis)
2x Helfrichi Firefish (Nemateleotris helfrichi)
Neon Goby (Elacatinus oceanops)
5 x Bartlett's Anthias (Pseudanthias bartlettorum)
Smith's Blenny (Meiacanthus smithii)
Wheeler's Goby (Amblyeleotris sp.)
Rhomboid Fairy Wrasse (Cirrhilabrus rhomboidalis)
Lineatus Fairy Wrasse (Cirrhilabrus linneatus)
Six Line Wrasse (Pseudocheilinus hexataenia)*

* Currently in Frag tank

And here is the list of fish I will most likely be getting in the next couple of months.

Yellow Pyramid Butterfly (Hemitaurichthys polylepis)
Royal Gramma Basslet (Gramma loreto)
Midas Blenny (Ecsenius midas)
3x Banggai Cardinalfish (Pterapogon kauderni)

Here is a video of my sump: (sorry the sound is not the best)
http://youtu.be/9PzAAmKE25Y

Here is a video of the display tank:
http://youtu.be/FtasFFPn9EA

kole18

i had a problem same of your swallowtail female almost lost this fish a month ago, just stop eating just saw this white thing in her mouth didn't bother it to removed it in my main tank as far as i know she was doing okay for the last few months all suddenly just stop eating still swimming around in my tank all my cleaner shrimp & blood shrimp they did really well to recover this fish but then i'd lost the male which is i have no clue finding what it cause to die this fish all i know the female has white stuff around her mouth & those wrasse xiaan amazing ;D

xiaan

The angle is looking worse every day. Yesterday I decided to take action I picked up some Erythromycin and set up my QT tank. He is in there right now and I hope he will start to recover I have 3 more days of adding meds to do the full douse.

xiaan

#28
Well It has almost been a year since my tank move and I thought about posting an update.

Not much has been updated for equipment (I have just added a skimmer collector) and I set up my QT tank as a softy tank and plumbed it into my system. .For coral most of my SPS have been doing fine, I think I have finally won the AEF battle on one colony, and my pink birds nest took off (It is now the size of a large watermelon) My clams on the other hand have not done so well I lost almost all my clams in a couple of days in March (some where over 4 years old but my blue squamosa survived :) ) I have no idea what happened to them (I had pyramid snails but I had not seen any since December). Since the tank move most of my Acans slowly dyed off (except for 3 colonies) I think one of my fish took a liking to them but I never found out who it was (my two nice Utra Acans are currently in my softy tank and doing well)

I have had some fish losses but the tank has been stable since January. after the summer I decided to go with a Wrasse dominated tank I had up to 10 wrasse's at one point but I am now down to 8.

Here is my current fish list:

Main Tank
Swallowtail Angelfish (Genicanthus melanospilos)
2x  Bartlett's Anthias (Pseudanthias bartlettorum)
Golden Midas Blenny (Ecsenius midas)
Zoster Butterflyfish (Hemitaurichthys zoster)
Banggai Cardinalfish (Pterapogon kauderni)
2x Ocellaris Clownfish (Amphiprion ocellaris)
2x Green Chromis (Chromis viridis)
Wheeler's Watchman Goby (Amblyeleotris wheeleri)
Sailfin Tang (Zebrasoma veliferum)
Chevron Tang (Ctenochaetus hawaiiensis)
White Spotted Wrasse (Anampses melanurus)
Red Fin Fairy Wrasse (Cirrhilabrus rubripinnis)
Rhomboid Fairy Wrasse (Cirrhilabrus rhomboidalis)
Tricolor Fairy Wrasse (Cirrhilabrus lubbocki)
Yellow Coris Wrasse (Halichoeres chrysus)
Lineatus Fairy Wrasse (Cirrhilabrus linneatus)
Ornate Leopard Wrasse (Macropharyngodon ornatus)
Yellow Fin Fairy Wrasse (Cirrhilabrus flavidorsalis)

12G Softy Tank
Yellow Assessor (Assessor flavissimus)

Frag Tank
Lawnmower Blenny (Salarias fasciatus)

Here is a list of fish I have had in the last year but did not make it:
Royal Gramma Basslet (Gramma loreto) - Died shortly after the move 4 years old
Bluespotted Jawfish (Opistognathus rosenblatti) - Never ate well, died after 1 month
3x Neon Goby (Elacatinus oceanops) - 3 disappeared  after 2 months (found one in my overflow 2 months later and then disappeared again might be still in there)
2x Helfrichi Firefish (Nemateleotris helfrichi) - 2 disappeared after 1 month never ate well
Randall's Shrimp Goby (Amblyeleotris randalli) - died in QT after 2 weeks
5x Banggai Cardinalfish (Pterapogon kauderni) - 4 died in QT in a couple of days and 1 disappeared in display 1 month
Smith's Blenny (Meiacanthus smithii) - disappeared after 1 month
Six Line Wrasse (Pseudocheilinus hexataenia) - jumped 2 years old
Swallowtail Angelfish (Genicanthus melanospilos) - died in QT after 1 week of treatment of mouth fungus was 3 weeks in display tank.
3x Bartlett's Anthias (Pseudanthias bartlettorum) - disappeared over 6 months
Dot-and-Dash Flasher Wrasse (Paracheilinus lineopunctatus) - died after 3 months possibly from aggression
Tail Spot Blenny (Salarias segmentatus) - disappeared after 6 months
Yasha Hase Shrimp Goby (Stonogobiops yashia) - disappeared after 3 weeks
Pearly Jawfish (Opistognathus aurifrons) - Never ate died in QT 2 weeks
Purple Tilefish (Hoplolatilus purpureus) - Jumped in covered QT tank after 1 week.

Here are some FTS:

Jan 2012




June 2012




For the full photosets you can go here:

http://www.flickr.com/photos/xiaan/sets/72157630045403992/
http://www.flickr.com/photos/xiaan/sets/72157630044525024/

leemay

wow good job! how big is the birdsnest, 15" or bigger?
can you post your current maintenance routine and salt brand?
much appreciated?
mike

mmaisonneuve

Well if it can help you....he's using Royal Nature Salt.....Back in the winter I had a chance to purchase some birdnest from Xiaan (a pink one and a green one) and both are booming like hell ! Personnaly I'm getting similar result using Tropic Marin Bio Active.
90g Tank, 50g Sump. Super Reef Octopus 2000 skimmer , 1 Bio Beads reactor, 1 GFO Reactor, 1 Carbon Reactor, 2 Ecotech Radion XR30w, 3 Vortech MP10w ES,  Eheim 1260 Return Pump. AquaController Apex System. SPS Reef with Purple Tang, Yellow Tang, Dejardini Tang, Mated pair Madanrin, Clown, Purple Fire Fish, Bengali Cardinals, Coral Beauty. Tons and tons of Snail and Hermits

Hookup


xiaan

Quote from: leemay on June 04, 2012, 07:34:12 PM
wow good job! how big is the birdsnest, 15" or bigger?
can you post your current maintenance routine and salt brand?
much appreciated?
mike

It is around 15" but I say it grows around 1/2" to 1" every month.

Most of the stuff is automated but here is my maintenance:

Every Day:
Feed 2 cubes of frozen food (Brine Shrimp/Spirulina & Mysis)

Every week:
Change Filter socks
Test parameters
Check balling salt levels

Every two weeks:
10% water change with Royal Nature Salt
Clean Skimmer

Every Month:
Replace Carbon (ROX Carbon in NextReef reactor)
Replace DI (I am on a well and it sucks up my DI )

Every 3 months:
Replace GFO (Bulk Reef supply High capacity GFO in NextReef reactor)
Top off Bio Pellets if needed (Bulk Reef Supply Bio Pellets in NextReef reactor)

Automated Stuff:
Refill RODI reservoir 2 times a day
Auto Skimmer Cleaner 4 times a day
Auto Feeder 2 times a day (Mix of several pellet foods)

Balling & Additives (all automated)
Ca 132ml/day (1kg Calcium Chloride + 2.5L rodi water)
Alk 480ml/day (2.5 Cups of Sodium Carbonate + 5L rodi water)
Mg 90ml/day (1kg Magnesium Chloride + 125g Magnesium Sulfate  + 2.5L rodi water)
MinS 2ml/day
Ultra Amin 6ml/day
Power Trace 1 1ml/day
Power Trace 2 1ml/day
Power Trace 3 2ml/day
Power Trace 4 2ml/day


kole18

That's a lot of maintenance for me, all I'm dosing for my tank is kalk/mix, mag stronium & iodine through my ato. This is really amazing but can't afford those equipment to dose those addietives, I also dose a amino acid 2x a week 5 drops atleast. But your tank is so high tech that makes your corals really happy then, as far as i can tell those birdnest gone really crazy in your tank man & good job as well fish selection amazing.

JetJumper

Quote from: xiaan on June 04, 2012, 10:19:16 PM
Replace DI (I am on a well and it sucks up my DI )

There is a way to fix this!  I had the same issue and installed a DIY degaussing system.  DI lasts forever now! 
.: JetJumper's Zone :.

Hookup

Why the different trace element levels? 

xiaan

Quote from: kole18 on June 04, 2012, 11:02:09 PM
That's a lot of maintenance for me, all I'm dosing for my tank is kalk/mix, mag stronium & iodine through my ato. This is really amazing but can't afford those equipment to dose those addietives, I also dose a amino acid 2x a week 5 drops atleast. But your tank is so high tech that makes your corals really happy then, as far as i can tell those birdnest gone really crazy in your tank man & good job as well fish selection amazing.

I am thinking about be cutting back on some of the additives (Amin & Power Trace) and see if it affects anything (I also used to douse Bak and Ultra Organic but since have stopped) this would also ge me down to just 4 dousing pumps (instead of 9)

Quote from: JetJumper on June 04, 2012, 11:23:14 PM
There is a way to fix this!  I had the same issue and installed a DIY degaussing system.  DI lasts forever now! 

I would love to know how you set that up I was thinking of trying something like that.

Quote from: Hookup on June 04, 2012, 11:54:01 PM
Why the different trace element levels? 

It was an experiment to see if there is any change in the coloration when I change the Power trace levels.  the results are inconclusive (I forgot I was doing it) my next experiment tis to remove all power trace and see if that changes anything.

JetJumper

Quote from: xiaan on June 05, 2012, 07:53:43 AM
I would love to know how you set that up I was thinking of trying something like that.

This is what I did to combat the dreaded CO2 Levels.
http://ovas.ca/forum/index.php?topic=52155.0
.: JetJumper's Zone :.

xiaan

Quote from: JetJumper on June 05, 2012, 07:59:15 AM
This is what I did to combat the dreaded CO2 Levels.
http://ovas.ca/forum/index.php?topic=52155.0


I also found of another way of doing it. before putting the Water through your RO you can bubble it for 24h that should allow suffisent gas exchange. I was thinking about doing this by having a reservoir of tap water and constantly bubble it. The reservoir would feed into my booster pump witch would lead into my RODI system. Every couple of days my controller would fill up the reservoir with fresh tap water. I guess this system would not be as efficient as I would have to store 1-3x the amount of water needed to make water. If I was to do it your way I would feed the RO water to a bucket that is always toped off then put a pump that would turn on when ever I needed RODI water.