Hi just picked up a ph controller and need help to set up the above and below set points to plug in my c02. Please call. Thanks
Quote from: Sean Morin on April 05, 2014, 08:04:01 PM
Hi just picked up a ph controller and need help to set up the above and below set points to plug in my c02. Please call. Thanks
Hi Sean, You'll notice I removed your phone number, you probably don't want to post that on a public forum. As far as the controller goes, you just need to ensure the unit is properly calibrated, reading the proper pH. Then all you need to do is set a minimum pH based on what you want your co2 concentration to be (based on pH & KH). The controller turns on the co2 when it's above the setpoint, and goes off when it goes below that setpoint. Plug your solenoid into the back of the adaptor that plugs into the timed outlet and you're set to go. Here's a video on how to calibrate it...
[embed=425,349]http://www.youtube.com/watch?v=e27I2u9rnUY[/embed]
Ok thank you still new.