I have an octopus hob on my tank and one of my impeller is not working good. I clean it up and put vaseline, the impeller works and suck the water big time but there is not movement in the skimmer. My question is what can i do?? the other one working perfectly.
réchaud...
Ma premiere idée..
If there is a kink in the air line or if it's pinched, then no air intake = no bubbles.
I am not sure what advantage vaseline would bring..
my 2c
J
pour ce qui est du kink, ce n'est pas ça car j'ai inversé les impeller et l'autre fonctionne toujours. Pour la vaseline, ça aide à la lubrification, avec le temps, l'impeller tourne moins bien donc la vaseline fait en sorte que ça fonctionne mieux.
merci mec
réchaud...
A few people can help you if your write your msg in french, but not all of us can :)
hey Pat,
Like i say at the beginning in english, why my impeller is working but not doing good working in my skimmer?? just have 1 impeller who did a good job. My air tube is ok, everything look perfect so what can be going wrong??
thx
réchaud...
If the impeller is spinning and pumping water but not producing any bubbles chances are there is something blocking part of the air getting into the pump.
The first thing to check as Jean pointed out is the air line tubing and to be sure it isnt kinked.
Second, remove and dissasemble the air silencer and check to see if it has picked up any debris.
Third remove the venturi. Check it and give it a clean anyways while it is off.
If you would like us to inspect you pump for you then please feel free to bring it in and we can check all of these points for you. You dont need to bring in the entire skimmer, just bring in the pump that isnt working fully.
thx guy, problem has been solve ;D i think the little hole on the top of the impeller was block by something.
thx again
réchaud...
No problem at all.
Very glad that I could help.